|
Rebuilding of Dead Cine 60 Battery Belts, 12V 7000mAH
Why you should choose Rathbone Energy a true
and professional battery assembler to
service your valuable Perrott Batteries and other equipment is in the
details. But, have you considered Upgrading?
The "BEST AVAILABLE" Battery Cell:
Nickel Cadmium: 500 Discharge Cycles
Nickel Metal Hydride: 500 Discharge Cycles
Our Lithium Ion Choice: 500 Discharge Cycles
Our Position on Nickel Cadmium Batteries and Why We Phased
Them Out PDF You cannot be going Green and
still be using Nickel Cadmium Battery Cells.
Our Best Value
Nickel Cadmium F Cell for under $240.00!
Using The Sanyo KR7000F Battery Cell, Rapid Charge
Rebuild of fine Cine 60 battery belts
or other broadcast news, cinema, film or video batteries after they have died is our specialty,
including those of defunct companies who frequently close their doors
and then open again
under the same or another name. Rathbone Energy,
Exceeding Industry Standards In Battery Cell Packs!
First the picture story.
Some pictures may be enlarged with a
click for a cleaner picture. Hoover 3 seconds to read picture text information.
 
PAG Analyzer Chargers for Battery Belt Applications, link at bottom of page.
The Best Rebuild Value for Your dead Cine 60 Battery
Belt (12V F cell) is our Best 110WH nickel cadmium battery insert and
Rebuild service using the Sanyo KR7000F Durable, High Capacity, Fast Charge
Cell. Nothing else in
Nickel Cadmium comes close! Rathbone Energy, Cell Quality
First, Cost Second - The Affordable Alternative, Exceeding Industry Standards In Battery Cell Packs
Since 1989! We lead, the rest follow.
Rebuild Service for your Dead Cine 60
Battery Belt:
Part Number:
RE-12SK7BNPTR
Description: 12V, 7AH, 110WH, 12 Sanyo KR7000F Fast charge, "F" cells,
500 full
charge discharge cycles (CD), handles heat best, most durable, 4
packs of 3 cells in 1x1x3
configuration, manufacturers brand labeled pvc shrink, heat shrink weld
tabs, fiber tubes, fiber top and bottom insulators.
Safety
Precautions
Price: US$299.00 each. 12 Month Warranty
.
Insert Kit:
The Best Available
Nickel Cadmium Cell: 500 Discharge Cycles
Nickel Metal Hydride Cell: 500 Discharge Cycles
Lithium Ion Cell: 500 Discharge Cycles
Have you considered:
Rathbone Lithium Ion Broadcast Batteries from 65WH to
725WH, $185.00 to
$1,980.00, 200WH - $308.00 + Package Deals
Before you have Rathbone rebuild your
battery belt consider what in 2008, we have encountered in parts
accessibility, plus the nickel cadmium issue. As these battery belts
wear with age, parts need to be replaced. In 2008 we were no
longer able to find many important replacement parts for several brand if
not all of these old battery belts rendering the new rebuild useless to the
client. Even though we would like to have the profit, if we
rebuild the pack with fresh, high end battery cells and the packs are
performing at peak, peak is sometimes too much for the worn out parts
and relays. We strongly encourage a new look at our lithium ion
technology.
Important information in our battery facts and FAQ's listed at the bottom of the
page. All major brand
Nickel Cadmium
D Cell Specs, (Panasonic, Saft, Sanyo)
We Do NOT use third world or brand name low end "economical"
or consumer grade battery cells. We are using the very best
nickel cadmium battery cells available, (exceeding industry
standards).
Battery Cell:
cell
specifications.
Rathbone Energy, Inc., recommends either the Sanyo KR5000DEL 5.5AH D cell or the Sanyo N4000DRL4.0AH D cell, (both at C\1
rate centered positive electrode cells) for best
performance, run time and value!
Sanyo KR5000DEL
$$$$ Best
Available Cell,
Highest Amperage
Sanyo N4000DRL Specs
$$$$ Excellent Quality
$ Brand name but economical, Generic, Third World cells,
never our choice.
In the larger amperage F cell belts we select
Sanyo KR-7000F.pdf
$$$ Best Available Cell
$ Brand name but economical, Generic, Third World cells,
or consumer grade are never our choice.
Each battery stack is individually
insulated by paper tubes for improved durability against hard bumps
and elevated temperatures.
The integrity of the pack is achieved by
glue (which is injected between each stack) and reinforced tape.
Stacks are interconnected with nickel plated weld tabs for extra
low resistance. When a complete belt insert is ordered, six stacks
are prepared for quick and easy installation into existing
belt carcasses.
The specification charts point out the
cells utilized for extended life and reliability. These belt
inserts were designed to be a very durable and long lasting battery
pack. We can also custom build any pack to your specifications with
several other available cells. For additional information or
questions please email
or call our technical information line.
Table Of Contents, This Web Page File
If on an outside
chance you have found a battery assembler or a battery pack
rebuilder that offers everything we do in: cell selection, building
your battery pack, efforts in safety, detailed black and white specification sheets,
packing slips, and invoices, you have just found the web site and
reason why.
The more you are accurately informed the more you
will appreciate rathboneenergy.com
                  
                             
               
   
(Due to continuing development
all prices & specifications are subject to change without notice).
Copyright Rathbone Energy, Inc.,
1991 - 2xxx, All Rights Reserved.
Last Revised Thursday, April 23, 2009 04:18:11 PM
|
