|
Rebuilding and Upgrade of Dead Frezzi Batteries, Aftermarket Brick,
With or without the Fuel Gauge
Why you should choose Rathbone Energy to
service your valuable Frezzi Batteries and other equipment is in the
details. But, have you considered Upgrading?
Rathbone Energy is a
Battery Assembler and Rathbone Broadcast lithium ion V
mount and Gold mount battery packs and chargers are equal to or exceed
Anton Bauer Batteries, Dionic Batteries, IDX Endura Batteries V Mount, Sony V
Mount, and VariZoom Lithium Ion Battery Packs and are a Lithium Ion
Battery Value.
The "BEST AVAILABLE" Battery Cell:
Nickel Cadmium: 500 Discharge Cycles
Nickel Metal Hydride: 500 Discharge Cycles
Our Lithium Ion Choice: 500 Discharge Cycles
Our Position on Nickel Cadmium Batteries and Why We Phased
Them Out PDF You cannot be going Green and
still be using Nickel Cadmium Battery Cells.
Rebuild
Service and Inserts
for fine Frezzi batteries, nickel cadmium and nickel metal hydride, Screw Together, or other broadcast news,
cinema, film or video batteries after they have died is
our specialty,
including those of defunct companies who frequently close their
doors and then open again under the same or another name. Rathbone Energy, is an SBA
Certified HubZone and Potential tax incentive for your company. Exceeding Industry Standards in Battery Cell Packs
Since 1989!
Click any picture to enlarge
        
BATTERY INSERT COMPONENTS, CELLS, AND PROFESSIONAL PACKAGING OF OUR
PREMIUM SERVICE: The same insert
is used in Logic Digital, Original Non-Digital Logic ProPac and Newer
Non-Digital Logic ProPac. Digital=LCD Screen; Non-Digital=No LCD
screen, and rebuilding aftermarket Frezzi batteries. No amateur work here either. We specify the exact
cells used in black and white on the description and invoice.
First picture is one of our Anton Bauer 2702 with DDM testing stations,
testing, autocal, and charging
different rebuilt Anton Bauer ProPac Logic, Digital ProPac Logic, Hytron 100
Series battery packs to verify proper operation of the completed battery, before we place the enclosure back
together.
This picture is a PAG Pulsar with same type batteries doing a
full diagnostic, discharge, charge, balance, and a recovery program, then to
a stand by status.
 
Unlike smart chargers, Cadex and PAG analyzers do NOT require
any digital circuitry to analyze and properly charger your
batteries.
If your Anton Bauer Interactive chargers no longer recognize particular
Anton Bauer Logic or Hytron series batteries the battery inserts may still
be good and there is a cost saving resolution. Call for details.
Part Number:
RE-13SK55FZI
Price:
US$167.00 each
Lithium
Ion Group
Once a Professional client understands the
difference between our Premium Rebuild and competitor alternative
recell/refills they completely drop interest in the Economy option.
A professional
understands that when your livelihood depends on your batteries you don't settle for second
best or worse in knowledge, product quality, or by use of consumer grade cells
and short cuts,. However, we can spend your money as well as the
amateur but WE WILL TELL YOU UP FRONT, IN BLACK AND WHITE, what you are
really getting for your dollar.
The Best Available
Nickel Cadmium Cell: 500 Discharge Cycles
Nickel Metal Hydride Cell: 500 Discharge Cycles
Lithium Ion Cell: 500 Discharge Cycles
Have you considered:
Rathbone Lithium Ion Broadcast Batteries from 65WH to 725WH, $185.00 to
$1,980.00, 200WH - $308.00 + Package Deals
Nickel Cadmium battery cells are environmentally
unfriendly. Thanks to
International Environmental Concerns and the good laws of other countries,
our battery cell manufacturers have already started to phase nickel cadmium from their
manufacturing lines. Panasonic did so three years ago. Being an
Environmentally Conscious Company, and Now having our own line of broadcast
battery packs, Rathbone Energy is now phasing nickel cadmium
out as well and expects to be finished by 2010, no longer supporting the rebuild
of Anton Bauer products. Being the only Battery Assembler Worldwide that
supports rebuilding battery packs, we understand that this will create a
hardship on those invested in Anton Bauer nickel cadmium but offer a great
alternative.
We Do NOT use third world or brand name low end
"economical" cells for our premium inserts and rebuilds. We are using the very best nickel cadmium
battery cells available, (exceeding industry standards)
Battery
Cell
specifications.
-
Opening, Building, Installing, Closing:
At Rathbone Energy our professional opening, closing, and
welding technique is a ten part
process.
-
Your battery packs are cleaned.
-
The
Old
Exterior Metal Band is removed, Sandblasted, and given a clean new
Powder Coat Finish. (No so with the non-skid covered enclosure)
-
Old insert is
removed from your back plate and secured for transporting to a battery recycle company.
Cost are incurred for disposal and freight of the old cores.
-
The electrical /
power contacts of your cases are cleaned.
-
New inserts are
built and tested on sophisticated analyzers.
-
Insert is installed
to your back plate and tested.
-
After passing
initial test the open battery is placed on an Anton Bauer InterActive
charger for testing.
-
Then the Exterior
Metal Band that reads something like is again placed back around the
battery case looking better than
when it arrived for recell.
-
The faceplate with
your name or logo and phone number is attached.
-
The battery pack
looks great, performs great, and is then packed and shipped back to you.
-
We receive your
many complimentary letters or emails, which for us, is a great reward.
We make no secret of our professional building process or procedure.
Battery packs are a specialty build product. Important detail information in our
battery facts and FAQ's listed at the bottom of the
page. We are
a small company and have been in business since 1989.
Our cell supplier is >
ISO9000.
|
|
